Free I Love You SVG

I Love You outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Love You outline lettering, drawn as a line
I Love You outline lettering. The preview is the SVG file itself.

“I Love You” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 67 mm (3.94 × 2.64 in), scales to any size
Pieces11 separate pieces
Outlines to cut22: 11 outer edges and 11 cut-outs
Cut length1,281 mm at this size
Narrowest part1.7 mm at this size
Nodes251 curve and line segments

Measured from the file. PNG: 2,000 × 1,367 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.43 mm325 mm140Too fine for most machines
2 × 1.34 in (51 × 34 mm)0.86 mm651 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.01 in (76 × 51 mm)1.3 mm976 mm15Vinyl, card and thin sheet
4 × 2.68 in (102 × 68 mm)1.7 mm1,301 mm8Vinyl, card and thin sheet
6 × 4.03 in (152 × 102 mm)2.6 mm1,952 mm2Vinyl, card and thin sheet
8 × 5.37 in (203 × 136 mm)3.5 mm2,603 mm2Any material, including 3 mm wood and acrylic
12 × 8.05 in (305 × 205 mm)5.2 mm3,904 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Love You SVG files

← I Love You with hearts All 13 I Love You designs I Love You stencil plate →