Free I Love You SVG

I Love You in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Love You in Lobster, as a solid black shape
I Love You in Lobster. The preview is the SVG file itself.

“I Love You” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 98 mm (3.94 × 3.84 in), scales to any size
Pieces6 separate pieces
Outlines to cut9: 6 outer edges and 3 cut-outs
Cut length1,015 mm at this size
Narrowest part1.8 mm at this size
Nodes168 curve and line segments

Measured from the file. PNG: 2,000 × 1,952 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.46 mm258 mm100Too fine for most machines
2 × 1.95 in (51 × 50 mm)0.91 mm516 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.93 in (76 × 74 mm)1.4 mm773 mm9Vinyl, card and thin sheet
4 × 3.9 in (102 × 99 mm)1.8 mm1,031 mm4Vinyl, card and thin sheet
6 × 5.85 in (152 × 149 mm)2.7 mm1,547 mm2Vinyl, card and thin sheet
8 × 7.8 in (203 × 198 mm)3.7 mm2,062 mm1Any material, including 3 mm wood and acrylic
12 × 11.7 in (305 × 297 mm)5.5 mm3,094 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Love You SVG files

← I Love You in Pacifico All 13 I Love You designs I Love You in Kaushan Script →