Free honeycomb SVG

Honeycomb breaking apart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Honeycomb breaking apart, as a solid black shape
Honeycomb breaking apart. The preview is the SVG file itself.

A full lattice across the top that loses more and more cells on the way down, until only a few are left. Some cells are filled, and every cell that remains shares a wall with a neighbour, so it is still one piece.

What is in the file

Size100 × 79 mm (3.94 × 3.12 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut28: 1 outer edge and 27 cut-outs
Cut length1,586 mm at this size
Thinnest wall2.3 mm at this size
Nodes222 curve and line segments

Measured from the file. PNG: 2,000 × 1,600 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightThinnest wallCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.58 mm403 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.58 in (51 × 40 mm)1.2 mm806 mm30Vinyl, card and thin sheet
3 × 2.38 in (76 × 60 mm)1.8 mm1,209 mm12Vinyl, card and thin sheet
4 × 3.17 in (102 × 80 mm)2.3 mm1,611 mm6Vinyl, card and thin sheet
6 × 4.75 in (152 × 121 mm)3.5 mm2,417 mm2Any material, including 3 mm wood and acrylic
8 × 6.34 in (203 × 161 mm)4.7 mm3,223 mm1Any material, including 3 mm wood and acrylic
12 × 9.5 in (305 × 241 mm)7 mm4,834 mm1Any material, including 3 mm wood and acrylic

The thinnest wall is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More honeycomb SVG files

← Honeycomb corner All 17 honeycombs Fading honeycomb →