Free honeycomb SVG

Fine honeycomb mesh SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fine honeycomb mesh, drawn as a line
Fine honeycomb mesh. The preview is the SVG file itself.

A panel of small cells, 9 mm across the flats, with 1.6 mm walls inside a border. A grille for laser-cut boxes, lamp shades and speaker covers; cut it large in anything softer.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut138: 1 outer edge and 137 cut-outs
Cut length3,765 mm at this size
Thinnest wall1.6 mm at this size
Nodes816 curve and line segments
Symmetry2-fold rotation and mirror
Also found asHoneycomb laser pattern SVG

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightThinnest wallCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.41 mm956 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.81 mm1,913 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)1.2 mm2,869 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)1.6 mm3,825 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)2.4 mm5,738 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)3.3 mm7,650 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)4.9 mm11,476 mm1Any material, including 3 mm wood and acrylic

The thinnest wall is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More honeycomb SVG files

← Honeycomb stencil All 17 honeycombs Honeycomb hexagon pattern →