Free honeycomb SVG

Honeycomb with double hexagons SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Honeycomb with double hexagons, drawn as a line
Honeycomb with double hexagons. The preview is the SVG file itself.

A lattice of large cells with a second, smaller hexagon outline floating inside each one. The inner hexagons are loose pieces by design, so use transfer tape.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces26 separate pieces
Outlines to cut44: 26 outer edges and 18 cut-outs
Cut length3,388 mm at this size
Thinnest wall2 mm at this size
Nodes412 curve and line segments
Also found asHexagon pattern SVG

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightThinnest wallCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.51 mm861 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1 mm1,721 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)1.5 mm2,582 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)2 mm3,442 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)3 mm5,163 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)4.1 mm6,884 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)6.1 mm10,327 mm1Any material, including 3 mm wood and acrylic

The thinnest wall is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More honeycomb SVG files

← Honeycomb hexagon pattern All 17 honeycombs Honeycomb of seven hexagons →