Free Hi I’m New Here SVG

Hi I’m New Here in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hi I’m New Here in Pacifico, as a solid black shape
Hi I’m New Here in Pacifico. The preview is the SVG file itself.

“Hi I’m New Here” set in Pacifico, a bold brush script, on 3 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size92 × 100 mm (3.62 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length934 mm at this size
Narrowest part1.7 mm at this size
Nodes434 curve and line segments

Measured from the file. PNG: 1,844 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.43 mm237 mm100Too fine for most machines
1.84 × 2 in (47 × 51 mm)0.86 mm474 mm25Fine detail: vinyl and paper only, weed with care
2.76 × 3 in (70 × 76 mm)1.3 mm712 mm12Vinyl, card and thin sheet
3.68 × 4 in (93 × 102 mm)1.7 mm949 mm6Vinyl, card and thin sheet
5.51 × 6 in (140 × 152 mm)2.6 mm1,423 mm2Vinyl, card and thin sheet
7.35 × 8 in (187 × 203 mm)3.5 mm1,898 mm1Any material, including 3 mm wood and acrylic
11.03 × 12 in (280 × 305 mm)5.2 mm2,847 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hi I’m New Here SVG files

← Hi I’m New Here with a drop shadow All 12 Hi I’m New Here designs Hi I’m New Here in Lobster →