Free Hi I’m New Here SVG

Hi I’m New Here with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hi I’m New Here with hearts, as a solid black shape
Hi I’m New Here with hearts. The preview is the SVG file itself.

“Hi I’m New Here” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size70 × 100 mm (2.74 × 3.94 in), scales to any size
Pieces17 separate pieces
Outlines to cut20: 17 outer edges and 3 cut-outs
Cut length919 mm at this size
Narrowest part0.9 mm at this size
Nodes264 curve and line segments

Measured from the file. PNG: 1,415 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.23 mm233 mm130Too fine for most machines
1.39 × 2 in (35 × 51 mm)0.46 mm467 mm35Too fine for most machines
2.09 × 3 in (53 × 76 mm)0.69 mm700 mm15Fine detail: vinyl and paper only, weed with care
2.78 × 4 in (71 × 102 mm)0.91 mm934 mm8Fine detail: vinyl and paper only, weed with care
4.18 × 6 in (106 × 152 mm)1.4 mm1,401 mm2Vinyl, card and thin sheet
5.57 × 8 in (141 × 203 mm)1.8 mm1,867 mm2Vinyl, card and thin sheet
8.35 × 12 in (212 × 305 mm)2.7 mm2,801 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hi I’m New Here SVG files

← Hi I’m New Here in script and capitals All 13 Hi I’m New Here designs Hi I’m New Here outline lettering →