Free Hi I’m New Here SVG

Hi I’m New Here in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hi I’m New Here in Lobster, as a solid black shape
Hi I’m New Here in Lobster. The preview is the SVG file itself.

“Hi I’m New Here” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size91 × 100 mm (3.57 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut14: 11 outer edges and 3 cut-outs
Cut length1,013 mm at this size
Narrowest part1.3 mm at this size
Nodes350 curve and line segments

Measured from the file. PNG: 1,823 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)0.33 mm257 mm110Too fine for most machines
1.82 × 2 in (46 × 51 mm)0.66 mm515 mm30Fine detail: vinyl and paper only, weed with care
2.72 × 3 in (69 × 76 mm)0.99 mm772 mm12Fine detail: vinyl and paper only, weed with care
3.63 × 4 in (92 × 102 mm)1.3 mm1,029 mm6Vinyl, card and thin sheet
5.45 × 6 in (138 × 152 mm)2 mm1,544 mm2Vinyl, card and thin sheet
7.26 × 8 in (185 × 203 mm)2.6 mm2,058 mm1Vinyl, card and thin sheet
10.9 × 12 in (277 × 305 mm)4 mm3,088 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hi I’m New Here SVG files

← Hi I’m New Here in Pacifico All 12 Hi I’m New Here designs Hi I’m New Here in Kaushan Script →