Free Hello Fall SVG

Hello Fall with a drop shadow SVG

Hello Fall with a drop shadow, in layered colours
Hello Fall with a drop shadow. The preview is the SVG file itself.

“Hello Fall” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 99 mm (3.94 × 3.89 in), scales to any size
Pieces6 separate pieces
Outlines to cut25: 6 outer edges and 19 cut-outs
Cut length2,127 mm at this size
Narrowest part3 mm at this size
Nodes581 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,975 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.99 in (25 × 25 mm)0.76 mm540 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.97 in (51 × 50 mm)1.5 mm1,081 mm25Vinyl, card and thin sheet
3 × 2.96 in (76 × 75 mm)2.3 mm1,621 mm9Vinyl, card and thin sheet
4 × 3.95 in (102 × 100 mm)3 mm2,161 mm4Any material, including 3 mm wood and acrylic
6 × 5.92 in (152 × 150 mm)4.6 mm3,242 mm1Any material, including 3 mm wood and acrylic
8 × 7.9 in (203 × 201 mm)6.1 mm4,322 mm1Any material, including 3 mm wood and acrylic
12 × 11.84 in (305 × 301 mm)9.1 mm6,483 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Fall SVG files

← Hello Fall stencil plate All 12 Hello Fall designs Hello Fall in Pacifico →