Free Hello Fall SVG

Hello Fall in Amatic SC SVG

Hello Fall in Amatic SC, as a solid black shape
Hello Fall in Amatic SC. The preview is the SVG file itself.

“Hello Fall” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size70 × 100 mm (2.74 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length1,058 mm at this size
Narrowest part1.5 mm at this size
Nodes341 curve and line segments

Measured from the file. PNG: 1,417 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.38 mm269 mm130Too fine for most machines
1.39 × 2 in (35 × 51 mm)0.76 mm537 mm35Fine detail: vinyl and paper only, weed with care
2.09 × 3 in (53 × 76 mm)1.1 mm806 mm15Vinyl, card and thin sheet
2.79 × 4 in (71 × 102 mm)1.5 mm1,075 mm8Vinyl, card and thin sheet
4.18 × 6 in (106 × 152 mm)2.3 mm1,612 mm2Vinyl, card and thin sheet
5.58 × 8 in (142 × 203 mm)3 mm2,150 mm2Any material, including 3 mm wood and acrylic
8.36 × 12 in (212 × 305 mm)4.6 mm3,225 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Fall SVG files

← Hello Fall in Alfa Slab One All 12 Hello Fall designs Hello Fall in block capitals →