Free Hello Fall SVG

Hello Fall in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello Fall in Kaushan Script, as a solid black shape
Hello Fall in Kaushan Script. The preview is the SVG file itself.

“Hello Fall” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size94 × 100 mm (3.71 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length1,109 mm at this size
Narrowest part1.5 mm at this size
Nodes274 curve and line segments

Measured from the file. PNG: 1,888 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.38 mm282 mm100Too fine for most machines
1.88 × 2 in (48 × 51 mm)0.76 mm563 mm25Fine detail: vinyl and paper only, weed with care
2.83 × 3 in (72 × 76 mm)1.1 mm845 mm12Vinyl, card and thin sheet
3.77 × 4 in (96 × 102 mm)1.5 mm1,127 mm6Vinyl, card and thin sheet
5.65 × 6 in (144 × 152 mm)2.3 mm1,690 mm2Vinyl, card and thin sheet
7.54 × 8 in (191 × 203 mm)3 mm2,253 mm1Any material, including 3 mm wood and acrylic
11.3 × 12 in (287 × 305 mm)4.6 mm3,380 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Fall SVG files

← Hello Fall in Lobster All 13 Hello Fall designs Hello Fall in Lilita One →