Free helicopter SVG

Helicopter in a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Helicopter in a heart, as a solid black shape
Helicopter in a heart. The preview is the SVG file itself.

A solid heart with the whole helicopter cut out of its middle as one clean opening, rotor and all. For the family of a pilot or a flight nurse, on a shirt, a mug or a card.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length699 mm at this size
Narrowest part1.7 mm at this size
Nodes82 curve and line segments

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.43 mm178 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.86 mm355 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)1.3 mm533 mm12Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)1.7 mm710 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)2.6 mm1,065 mm2Vinyl, card and thin sheet
8 × 7.23 in (203 × 184 mm)3.5 mm1,420 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)5.2 mm2,131 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More helicopter SVG files

← Helicopter carrying a blank banner All 14 helicopters Helicopter landing on a city rooftop →