Free heartbeat SVG

Heartbeat line running into a heart SVG

Heartbeat line running into a heart, as a solid black shape
Heartbeat line running into a heart. The preview is the SVG file itself.

Two beats and then a solid heart at the end of the line, as if the trace had drawn it. One piece, with the heart about a third of the length.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 38 mm (3.94 × 1.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length384 mm at this size
Narrowest part3.2 mm at this size
Nodes77 curve and line segments

Measured from the file. PNG: 2,000 × 798 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.38 in (25 × 10 mm)0.81 mm98 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.75 in (51 × 19 mm)1.6 mm195 mm60Vinyl, card and thin sheet
3 × 1.13 in (76 × 29 mm)2.4 mm293 mm27Vinyl, card and thin sheet
4 × 1.5 in (102 × 38 mm)3.3 mm390 mm14Any material, including 3 mm wood and acrylic
6 × 2.25 in (152 × 57 mm)4.9 mm585 mm4Any material, including 3 mm wood and acrylic
8 × 3 in (203 × 76 mm)6.5 mm780 mm3Any material, including 3 mm wood and acrylic
12 × 4.5 in (305 × 114 mm)9.8 mm1,170 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More heartbeat SVG files

← Heartbeat fading to a flat line All 15 heartbeats Heartbeat with a solid heart in the middle →