Free heartbeat SVG

Heartbeat across a heart outline SVG

Heartbeat across a heart outline, as a solid black shape
Heartbeat across a heart outline. The preview is the SVG file itself.

An open heart with the line passing straight through it and beating inside. The line and the outline weld where they cross, so the whole design is one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 56 mm (3.94 × 2.21 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length595 mm at this size
Narrowest part3.1 mm at this size
Nodes73 curve and line segments

Measured from the file. PNG: 2,000 × 1,156 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.79 mm151 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.12 in (51 × 28 mm)1.6 mm302 mm45Vinyl, card and thin sheet
3 × 1.68 in (76 × 43 mm)2.4 mm453 mm18Vinyl, card and thin sheet
4 × 2.24 in (102 × 57 mm)3.1 mm605 mm8Any material, including 3 mm wood and acrylic
6 × 3.37 in (152 × 85 mm)4.7 mm907 mm3Any material, including 3 mm wood and acrylic
8 × 4.49 in (203 × 114 mm)6.3 mm1,209 mm2Any material, including 3 mm wood and acrylic
12 × 6.73 in (305 × 171 mm)9.4 mm1,814 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More heartbeat SVG files

← Heartbeat with a solid heart in the middle All 15 heartbeats Stethoscope heart with a heartbeat →