Free heartbeat SVG

Heartbeat line with a guitar SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Heartbeat line with a guitar, as a solid black shape
Heartbeat line with a guitar. The preview is the SVG file itself.

A small acoustic guitar leans across the line between two beats, with a sound hole, a bridge and four tuning pegs. One piece.

What is in the file

Size100 × 70 mm (3.94 × 2.75 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length512 mm at this size
Narrowest part2.6 mm at this size
Nodes110 curve and line segments

Measured from the file. PNG: 2,000 × 1,419 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.66 mm130 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.4 in (51 × 35 mm)1.3 mm260 mm35Vinyl, card and thin sheet
3 × 2.09 in (76 × 53 mm)2 mm390 mm15Vinyl, card and thin sheet
4 × 2.79 in (102 × 71 mm)2.6 mm520 mm8Vinyl, card and thin sheet
6 × 4.19 in (152 × 106 mm)4 mm780 mm2Any material, including 3 mm wood and acrylic
8 × 5.58 in (203 × 142 mm)5.3 mm1,040 mm2Any material, including 3 mm wood and acrylic
12 × 8.38 in (305 × 213 mm)7.9 mm1,561 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More heartbeat SVG files

← Heartbeat line with music notes All 15 heartbeats Heartbeat line with a semicolon →