Free headphones SVG

Headphones with padded ear cups SVG

Headphones with padded ear cups, as a solid black shape
Headphones with padded ear cups. The preview is the SVG file itself.

Over-ear headphones from the front: a padded band, a yoke at each end, and two cups with a line where the cushion meets the shell. Exactly mirrored, so it centres on a shirt or a studio door.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 82 mm (3.94 × 3.23 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length784 mm at this size
Narrowest part2.7 mm at this size
Nodes92 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,654 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.69 mm199 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.64 in (51 × 42 mm)1.4 mm398 mm30Vinyl, card and thin sheet
3 × 2.46 in (76 × 62 mm)2.1 mm597 mm12Vinyl, card and thin sheet
4 × 3.28 in (102 × 83 mm)2.7 mm797 mm6Vinyl, card and thin sheet
6 × 4.92 in (152 × 125 mm)4.1 mm1,195 mm2Any material, including 3 mm wood and acrylic
8 × 6.56 in (203 × 167 mm)5.5 mm1,593 mm1Any material, including 3 mm wood and acrylic
12 × 9.84 in (305 × 250 mm)8.2 mm2,390 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More headphones SVG files

← Layered headphones in four colours All 16 headphones Simple headphone icon →