Free headphones SVG

Headphones outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Headphones outline, drawn as a line
Headphones outline. The preview is the SVG file itself.

The headphones as an even line: the band, both yokes, and each cup drawn as a shell with a cushion inside it. The same on both sides. For colouring, foil and pen plotters.

What is in the file

Size100 × 82 mm (3.94 × 3.24 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length991 mm at this size
Narrowest part2.2 mm at this size
Nodes140 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,660 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.56 mm252 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.65 in (51 × 42 mm)1.1 mm503 mm30Vinyl, card and thin sheet
3 × 2.47 in (76 × 63 mm)1.7 mm755 mm12Vinyl, card and thin sheet
4 × 3.29 in (102 × 84 mm)2.2 mm1,007 mm6Vinyl, card and thin sheet
6 × 4.94 in (152 × 125 mm)3.4 mm1,510 mm2Any material, including 3 mm wood and acrylic
8 × 6.58 in (203 × 167 mm)4.5 mm2,014 mm1Any material, including 3 mm wood and acrylic
12 × 9.88 in (305 × 251 mm)6.7 mm3,021 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More headphones SVG files

← Simple headphone icon All 16 headphones Headset: headphones with a microphone →