Free Happy 30th Birthday SVG

Happy 30th Birthday in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy 30th Birthday in Lobster, as a solid black shape
Happy 30th Birthday in Lobster. The preview is the SVG file itself.

“Happy 30th Birthday” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size94 × 100 mm (3.7 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut19: 11 outer edges and 8 cut-outs
Cut length1,387 mm at this size
Narrowest part1 mm at this size
Nodes373 curve and line segments

Measured from the file. PNG: 1,887 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.25 mm352 mm100Too fine for most machines
1.88 × 2 in (48 × 51 mm)0.51 mm705 mm25Fine detail: vinyl and paper only, weed with care
2.82 × 3 in (72 × 76 mm)0.76 mm1,057 mm12Fine detail: vinyl and paper only, weed with care
3.76 × 4 in (96 × 102 mm)1 mm1,409 mm6Vinyl, card and thin sheet
5.65 × 6 in (143 × 152 mm)1.5 mm2,114 mm2Vinyl, card and thin sheet
7.53 × 8 in (191 × 203 mm)2 mm2,818 mm1Vinyl, card and thin sheet
11.29 × 12 in (287 × 305 mm)3 mm4,228 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy 30th Birthday SVG files

← Happy 30th Birthday in Pacifico All 13 Happy 30th Birthday designs Happy 30th Birthday in Kaushan Script →