Free Happy 30th Birthday SVG

Happy 30th Birthday in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy 30th Birthday in Kaushan Script, as a solid black shape
Happy 30th Birthday in Kaushan Script. The preview is the SVG file itself.

“Happy 30th Birthday” set in Kaushan Script, a lively brush script, on 3 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 96 mm (3.94 × 3.76 in), scales to any size
Pieces17 separate pieces
Outlines to cut21: 17 outer edges and 4 cut-outs
Cut length1,543 mm at this size
Narrowest part0.8 mm at this size
Nodes591 curve and line segments

Measured from the file. PNG: 2,000 × 1,913 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.2 mm392 mm100Too fine for most machines
2 × 1.91 in (51 × 49 mm)0.41 mm784 mm25Too fine for most machines
3 × 2.87 in (76 × 73 mm)0.61 mm1,176 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.82 in (102 × 97 mm)0.81 mm1,568 mm6Fine detail: vinyl and paper only, weed with care
6 × 5.73 in (152 × 146 mm)1.2 mm2,352 mm2Vinyl, card and thin sheet
8 × 7.64 in (203 × 194 mm)1.6 mm3,135 mm1Vinyl, card and thin sheet
12 × 11.46 in (305 × 291 mm)2.4 mm4,703 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy 30th Birthday SVG files

← Happy 30th Birthday in Lobster All 13 Happy 30th Birthday designs Happy 30th Birthday in Lilita One →