Happy 30th Birthday in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Happy 30th Birthday” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 83 mm (3.94 × 3.27 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 26: 18 outer edges and 8 cut-outs |
| Cut length | 1,168 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 394 curve and line segments |
Measured from the file. PNG: 2,000 × 1,675 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.83 in (25 × 21 mm) | 0.84 mm | 297 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.66 in (51 × 42 mm) | 1.7 mm | 593 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.49 in (76 × 63 mm) | 2.5 mm | 890 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.32 in (102 × 84 mm) | 3.4 mm | 1,187 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.99 in (152 × 127 mm) | 5 mm | 1,780 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.65 in (203 × 169 mm) | 6.7 mm | 2,373 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.97 in (305 × 253 mm) | 10 mm | 3,560 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy 30th Birthday SVG files
-
Happy 30th Birthday in Alfa Slab One Solid · 18 pieces -
Happy 30th Birthday in Amatic SC Solid · 17 pieces -
Happy 30th Birthday in block capitals Solid · 17 pieces -
Happy 30th Birthday in script and capitals Solid · 13 pieces -
Happy 30th Birthday with stars Solid · 17 pieces -
Happy 30th Birthday outline lettering Outline · 22 pieces -
Happy 30th Birthday stencil plate Solid · one piece -
Happy 30th Birthday with a drop shadow Layered · 10 pieces
← Happy 30th Birthday in Kaushan Script All 12 Happy 30th Birthday designs Happy 30th Birthday in Alfa Slab One →