Free hand SVG

Raised hand in a fist SVG

Raised hand in a fist, as a solid black shape — Raised hand in a fist. The preview is the SVG file itself.

A clenched fist held up on its forearm, seen from the front: four knuckles along the top, the fingers parted by slits and the thumb lying across them. A sign of strength and solidarity.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	53 × 100 mm (2.08 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	631 mm at this size
Narrowest part	3.7 mm at this size
Nodes	90 curve and line segments

Measured from the file. PNG: 1,094 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.53 × 1 in (13 × 25 mm)	0.94 mm	160 mm	160	Fine detail: vinyl and paper only, weed with care
1.06 × 2 in (27 × 51 mm)	1.9 mm	321 mm	45	Vinyl, card and thin sheet
1.59 × 3 in (40 × 76 mm)	2.8 mm	481 mm	18	Vinyl, card and thin sheet
2.12 × 4 in (54 × 102 mm)	3.8 mm	641 mm	10	Any material, including 3 mm wood and acrylic
3.17 × 6 in (81 × 152 mm)	5.6 mm	962 mm	3	Any material, including 3 mm wood and acrylic
4.23 × 8 in (107 × 203 mm)	7.5 mm	1,282 mm	2	Any material, including 3 mm wood and acrylic
6.35 × 12 in (161 × 305 mm)	11 mm	1,923 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hand SVG files

← Two thumbs up hands All 18 hands Fist bump, two hands →