Free hand SVG

Hamsa hand with an eye SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hamsa hand with an eye, as a solid black shape
Hamsa hand with an eye. The preview is the SVG file itself.

The hamsa charm: a symmetrical hand with three straight fingers and two curled outer ones, an eye in the palm, a teardrop in each finger and a ring of dots. For wall hangings and jewellery.

What is in the file

Size95 × 100 mm (3.72 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length773 mm at this size
Narrowest part2.9 mm at this size
Nodes172 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,894 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.74 mm196 mm100Fine detail: vinyl and paper only, weed with care
1.89 × 2 in (48 × 51 mm)1.5 mm393 mm25Vinyl, card and thin sheet
2.83 × 3 in (72 × 76 mm)2.2 mm589 mm12Vinyl, card and thin sheet
3.78 × 4 in (96 × 102 mm)2.9 mm785 mm6Vinyl, card and thin sheet
5.67 × 6 in (144 × 152 mm)4.4 mm1,178 mm2Any material, including 3 mm wood and acrylic
7.56 × 8 in (192 × 203 mm)5.9 mm1,571 mm1Any material, including 3 mm wood and acrylic
11.34 × 12 in (288 × 305 mm)8.8 mm2,356 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hand SVG files

← I love you hand sign All 18 hands Open hand with palm lines →