Free guitar SVG

Guitar with wings SVG

Guitar with wings, as a solid black shape — Guitar with wings. The preview is the SVG file itself.

An upright acoustic guitar with a feathered wing spread on each side of the body. For memorials, tributes and rock and roll shirts alike.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 90 mm (3.94 × 3.54 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	1,041 mm at this size
Narrowest part	1.7 mm at this size
Nodes	202 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,806 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.43 mm	264 mm	110	Too fine for most machines
2 × 1.8 in (51 × 46 mm)	0.86 mm	529 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.7 in (76 × 69 mm)	1.3 mm	793 mm	12	Vinyl, card and thin sheet
4 × 3.6 in (102 × 91 mm)	1.7 mm	1,058 mm	6	Vinyl, card and thin sheet
6 × 5.39 in (152 × 137 mm)	2.6 mm	1,586 mm	2	Vinyl, card and thin sheet
8 × 7.19 in (203 × 183 mm)	3.5 mm	2,115 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.79 in (305 × 274 mm)	5.2 mm	3,173 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More guitar SVG files

← Guitar against a sunset All 15 guitars Guitar pick with a guitar cut out →