Free guitar SVG

Guitar neck and headstock SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Guitar neck and headstock, as a solid black shape
Guitar neck and headstock. The preview is the SVG file itself.

The headstock and the first nine frets of a guitar neck, lying level, with dot markers between the frets and six pegs. A long shape that suits a key rack or a shelf edge.

What is in the file

Size100 × 37 mm (3.94 × 1.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length663 mm at this size
Narrowest part1.3 mm at this size
Nodes139 curve and line segments

Measured from the file. PNG: 2,000 × 790 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.33 mm168 mm210Too fine for most machines
2 × 0.74 in (51 × 19 mm)0.66 mm337 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.11 in (76 × 28 mm)0.99 mm505 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.48 in (102 × 38 mm)1.3 mm674 mm14Vinyl, card and thin sheet
6 × 2.23 in (152 × 57 mm)2 mm1,010 mm5Vinyl, card and thin sheet
8 × 2.97 in (203 × 75 mm)2.6 mm1,347 mm3Vinyl, card and thin sheet
12 × 4.45 in (305 × 113 mm)4 mm2,021 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More guitar SVG files

← Guitar pick monogram frame All 15 guitars Cute guitar with a face →