Free guitar SVG

Guitar outline SVG

Guitar outline, drawn as a line
Guitar outline. The preview is the SVG file itself.

An upright acoustic guitar as a line drawing, with frets across the neck and three strings running over the sound hole to the bridge. For colouring pages, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size40 × 100 mm (1.57 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut18: 1 outer edge and 17 cut-outs
Cut length848 mm at this size
Narrowest part1.8 mm at this size
Nodes193 curve and line segments
SymmetryMirror

Measured from the file. PNG: 842 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.4 × 1 in (10 × 25 mm)0.46 mm215 mm200Too fine for most machines
0.8 × 2 in (20 × 51 mm)0.91 mm431 mm60Fine detail: vinyl and paper only, weed with care
1.19 × 3 in (30 × 76 mm)1.4 mm646 mm24Vinyl, card and thin sheet
1.59 × 4 in (40 × 102 mm)1.8 mm862 mm12Vinyl, card and thin sheet
2.39 × 6 in (61 × 152 mm)2.7 mm1,292 mm4Vinyl, card and thin sheet
3.18 × 8 in (81 × 203 mm)3.7 mm1,723 mm3Any material, including 3 mm wood and acrylic
4.78 × 12 in (121 × 305 mm)5.5 mm2,585 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More guitar SVG files

← Guitar silhouette All 15 guitars Guitar with a heart sound hole →