Godmother stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “GODMOTHER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 30 mm (3.94 × 1.18 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 777 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 201 curve and line segments |
Measured from the file. PNG: 2,000 × 652 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.3 in (25 × 8 mm) | 0.3 mm | 197 mm | 240 | Too fine for most machines |
| 2 × 0.6 in (51 × 15 mm) | 0.61 mm | 395 mm | 75 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.9 in (76 × 23 mm) | 0.91 mm | 592 mm | 33 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.2 in (102 × 30 mm) | 1.2 mm | 789 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.79 in (152 × 46 mm) | 1.8 mm | 1,184 mm | 6 | Vinyl, card and thin sheet |
| 8 × 2.39 in (203 × 61 mm) | 2.4 mm | 1,579 mm | 4 | Vinyl, card and thin sheet |
| 12 × 3.59 in (305 × 91 mm) | 3.7 mm | 2,368 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Godmother SVG files
-
Godmother with a drop shadow Layered · 2 pieces
-
Godmother with a heart Solid · 3 pieces
-
Godmother in Pacifico Solid · one piece
-
Godmother in Lobster Solid · 2 pieces
-
Godmother in Kaushan Script Solid · 9 pieces
-
Godmother in Lilita One Solid · 9 pieces
-
Godmother in Alfa Slab One Solid · 8 pieces
-
Godmother in Amatic SC Solid · 9 pieces
← Godmother outline lettering All 13 Godmother designs Godmother with a drop shadow →