Free Godmother SVG

Godmother in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Godmother in Lilita One, as a solid black shape
Godmother in Lilita One. The preview is the SVG file itself.

“Godmother” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 15 mm (3.94 × 0.6 in), scales to any size
Pieces9 separate pieces
Outlines to cut13: 9 outer edges and 4 cut-outs
Cut length471 mm at this size
Narrowest part2.4 mm at this size
Nodes157 curve and line segments

Measured from the file. PNG: 2,000 × 371 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.15 in (25 × 4 mm)0.61 mm120 mm340Fine detail: vinyl and paper only, weed with care
2 × 0.31 in (51 × 8 mm)1.2 mm239 mm120Vinyl, card and thin sheet
3 × 0.46 in (76 × 12 mm)1.8 mm359 mm54Vinyl, card and thin sheet
4 × 0.61 in (102 × 16 mm)2.4 mm479 mm30Vinyl, card and thin sheet
6 × 0.92 in (152 × 23 mm)3.7 mm718 mm10Any material, including 3 mm wood and acrylic
8 × 1.22 in (203 × 31 mm)4.9 mm957 mm8Any material, including 3 mm wood and acrylic
12 × 1.84 in (305 × 47 mm)7.3 mm1,436 mm5Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Godmother SVG files

← Godmother in Kaushan Script All 13 Godmother designs Godmother in Alfa Slab One →