Free Godmother SVG

Godmother outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Godmother outline lettering, drawn as a line
Godmother outline lettering. The preview is the SVG file itself.

“Godmother” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 14 mm (3.94 × 0.56 in), scales to any size
Pieces13 separate pieces
Outlines to cut26: 13 outer edges and 13 cut-outs
Cut length841 mm at this size
Narrowest part1.1 mm at this size
Nodes297 curve and line segments

Measured from the file. PNG: 2,000 × 352 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.14 in (25 × 4 mm)0.28 mm214 mm350Too fine for most machines
2 × 0.29 in (51 × 7 mm)0.56 mm427 mm125Fine detail: vinyl and paper only, weed with care
3 × 0.43 in (76 × 11 mm)0.84 mm641 mm57Fine detail: vinyl and paper only, weed with care
4 × 0.57 in (102 × 15 mm)1.1 mm854 mm30Vinyl, card and thin sheet
6 × 0.86 in (152 × 22 mm)1.7 mm1,282 mm11Vinyl, card and thin sheet
8 × 1.14 in (203 × 29 mm)2.2 mm1,709 mm9Vinyl, card and thin sheet
12 × 1.72 in (305 × 44 mm)3.4 mm2,563 mm6Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Godmother SVG files

← Godmother with hearts All 13 Godmother designs Godmother stencil plate →