Free God Bless This Hot Mess SVG

God Bless This Hot Mess in Alfa Slab One SVG

God Bless This Hot Mess in Alfa Slab One, as a solid black shape
God Bless This Hot Mess in Alfa Slab One. The preview is the SVG file itself.

“God Bless This Hot Mess” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.48 in), scales to any size
Pieces20 separate pieces
Outlines to cut27: 20 outer edges and 7 cut-outs
Cut length1,233 mm at this size
Narrowest part2.4 mm at this size
Nodes609 curve and line segments

Measured from the file. PNG: 2,000 × 1,290 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.61 mm313 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.26 in (51 × 32 mm)1.2 mm626 mm40Vinyl, card and thin sheet
3 × 1.89 in (76 × 48 mm)1.8 mm940 mm15Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)2.4 mm1,253 mm8Vinyl, card and thin sheet
6 × 3.79 in (152 × 96 mm)3.7 mm1,879 mm3Any material, including 3 mm wood and acrylic
8 × 5.05 in (203 × 128 mm)4.9 mm2,505 mm2Any material, including 3 mm wood and acrylic
12 × 7.57 in (305 × 192 mm)7.3 mm3,758 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless This Hot Mess SVG files

← God Bless This Hot Mess in Lilita One All 12 God Bless This Hot Mess designs God Bless This Hot Mess in Amatic SC →