Free God Bless This Hot Mess SVG

God Bless This Hot Mess in script and capitals SVG

God Bless This Hot Mess in script and capitals, as a solid black shape
God Bless This Hot Mess in script and capitals. The preview is the SVG file itself.

“God Bless” in Pacifico script over “THIS HOT MESS” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size80 × 100 mm (3.17 × 3.94 in), scales to any size
Pieces14 separate pieces
Outlines to cut21: 14 outer edges and 7 cut-outs
Cut length1,702 mm at this size
Narrowest part1.6 mm at this size
Nodes346 curve and line segments

Measured from the file. PNG: 1,623 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.41 mm432 mm120Too fine for most machines
1.61 × 2 in (41 × 51 mm)0.81 mm865 mm30Fine detail: vinyl and paper only, weed with care
2.41 × 3 in (61 × 76 mm)1.2 mm1,297 mm12Vinyl, card and thin sheet
3.22 × 4 in (82 × 102 mm)1.6 mm1,729 mm6Vinyl, card and thin sheet
4.82 × 6 in (123 × 152 mm)2.4 mm2,594 mm2Vinyl, card and thin sheet
6.43 × 8 in (163 × 203 mm)3.3 mm3,458 mm1Any material, including 3 mm wood and acrylic
9.65 × 12 in (245 × 305 mm)4.9 mm5,188 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless This Hot Mess SVG files

← God Bless This Hot Mess in block capitals All 12 God Bless This Hot Mess designs God Bless This Hot Mess with hearts →