Free God Bless This Hot Mess SVG

God Bless This Hot Mess in Amatic SC SVG

God Bless This Hot Mess in Amatic SC, as a solid black shape
God Bless This Hot Mess in Amatic SC. The preview is the SVG file itself.

“God Bless This Hot Mess” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces19 separate pieces
Outlines to cut24: 19 outer edges and 5 cut-outs
Cut length1,547 mm at this size
Narrowest part1 mm at this size
Nodes606 curve and line segments

Measured from the file. PNG: 1,677 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.25 mm393 mm110Too fine for most machines
1.66 × 2 in (42 × 51 mm)0.51 mm786 mm30Fine detail: vinyl and paper only, weed with care
2.5 × 3 in (63 × 76 mm)0.76 mm1,179 mm12Fine detail: vinyl and paper only, weed with care
3.33 × 4 in (85 × 102 mm)1 mm1,572 mm6Vinyl, card and thin sheet
4.99 × 6 in (127 × 152 mm)1.5 mm2,358 mm2Vinyl, card and thin sheet
6.66 × 8 in (169 × 203 mm)2 mm3,144 mm1Vinyl, card and thin sheet
9.98 × 12 in (254 × 305 mm)3 mm4,715 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More God Bless This Hot Mess SVG files

← God Bless This Hot Mess in Alfa Slab One All 12 God Bless This Hot Mess designs God Bless This Hot Mess in block capitals →