Goat silhouette SVG
A billy goat in profile: two swept-back horns, an ear held out, a beard, a lean body on four thin legs and a short tail standing up. A dot for the eye is the only inside cut.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 89 × 100 mm (3.49 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 582 mm at this size |
| Narrowest part | 5.2 mm at this size |
| Nodes | 204 curve and line segments |
Measured from the file. PNG: 1,783 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.89 × 1 in (23 × 25 mm) | 1.3 mm | 148 mm | 110 | Vinyl, card and thin sheet |
| 1.77 × 2 in (45 × 51 mm) | 2.6 mm | 296 mm | 30 | Vinyl, card and thin sheet |
| 2.66 × 3 in (68 × 76 mm) | 4 mm | 443 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.55 × 4 in (90 × 102 mm) | 5.3 mm | 591 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.32 × 6 in (135 × 152 mm) | 7.9 mm | 887 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.1 × 8 in (180 × 203 mm) | 11 mm | 1,183 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.64 × 12 in (270 × 305 mm) | 16 mm | 1,774 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Goat face 
Goat head from the side 
Nubian goat 
Pygmy goat 
Baby goat jumping 
Show goat 
Nanny goat and kid 
Goat family 