Free goat SVG

Baby goat jumping SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby goat jumping, as a solid black shape
Baby goat jumping. The preview is the SVG file itself.

A kid in mid leap, legs flung out front and back, tail up and two horn buds showing. No beard yet. Scatter a few across a nursery wall or a party banner.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 72 mm (3.94 × 2.85 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length412 mm at this size
Narrowest part2.5 mm at this size
Nodes128 curve and line segments

Measured from the file. PNG: 2,000 × 1,467 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.64 mm105 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.45 in (51 × 37 mm)1.3 mm209 mm35Vinyl, card and thin sheet
3 × 2.17 in (76 × 55 mm)1.9 mm314 mm15Vinyl, card and thin sheet
4 × 2.89 in (102 × 73 mm)2.5 mm419 mm6Vinyl, card and thin sheet
6 × 4.34 in (152 × 110 mm)3.8 mm628 mm2Any material, including 3 mm wood and acrylic
8 × 5.78 in (203 × 147 mm)5.1 mm837 mm2Any material, including 3 mm wood and acrylic
12 × 8.68 in (305 × 220 mm)7.6 mm1,256 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More goat SVG files

← Pygmy goat All 13 goats Show goat →