Aviator glasses SVG
Teardrop wire rims with a straight top bar, a second arched bridge under it and two nose pads. The pilot’s frame, with clear lenses.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 35 mm (3.94 × 1.39 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 541 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 82 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 754 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.35 in (25 × 9 mm) | 0.61 mm | 137 mm | 220 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.7 in (51 × 18 mm) | 1.2 mm | 275 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.06 in (76 × 27 mm) | 1.8 mm | 412 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.41 in (102 × 36 mm) | 2.4 mm | 550 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.11 in (152 × 54 mm) | 3.7 mm | 824 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.82 in (203 × 72 mm) | 4.9 mm | 1,099 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.22 in (305 × 107 mm) | 7.3 mm | 1,649 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Cat eye glasses 
Heart glasses 
Nerd glasses with tape 
Reading glasses on a cord 
Antique spectacles 
Broken glasses 
Folded eyeglasses 
Glasses with eyelashes 