Free gingerbread man SVG

Waving gingerbread man SVG

Waving gingerbread man, as a solid black shape
Waving gingerbread man. The preview is the SVG file itself.

A gingerbread man with one arm up in a wave and the other held low, with rosy cheeks, two buttons and iced cuffs. For a welcome sign or the front of a card.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size86 × 100 mm (3.38 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length684 mm at this size
Narrowest part3 mm at this size
Nodes168 curve and line segments

Measured from the file. PNG: 1,729 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)0.76 mm174 mm110Fine detail: vinyl and paper only, weed with care
1.72 × 2 in (44 × 51 mm)1.5 mm347 mm30Vinyl, card and thin sheet
2.58 × 3 in (65 × 76 mm)2.3 mm521 mm12Vinyl, card and thin sheet
3.44 × 4 in (87 × 102 mm)3 mm695 mm6Any material, including 3 mm wood and acrylic
5.15 × 6 in (131 × 152 mm)4.6 mm1,042 mm2Any material, including 3 mm wood and acrylic
6.87 × 8 in (175 × 203 mm)6.1 mm1,390 mm1Any material, including 3 mm wood and acrylic
10.31 × 12 in (262 × 305 mm)9.1 mm2,085 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gingerbread man SVG files

← Gingerbread man outline All 19 gingerbread men Gingerbread boy with a bow tie →