Free gingerbread man SVG

Gingerbread boy with a bow tie SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gingerbread boy with a bow tie, as a solid black shape
Gingerbread boy with a bow tie. The preview is the SVG file itself.

A gingerbread boy doing a star jump, arms up and legs wide, with a bow tie under his chin and two buttons. A livelier shape than the standing one.

What is in the file

Size92 × 100 mm (3.63 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length766 mm at this size
Narrowest part1.8 mm at this size
Nodes178 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,848 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.46 mm195 mm100Too fine for most machines
1.84 × 2 in (47 × 51 mm)0.91 mm389 mm25Fine detail: vinyl and paper only, weed with care
2.76 × 3 in (70 × 76 mm)1.4 mm584 mm12Vinyl, card and thin sheet
3.68 × 4 in (94 × 102 mm)1.8 mm778 mm6Vinyl, card and thin sheet
5.53 × 6 in (140 × 152 mm)2.7 mm1,167 mm2Vinyl, card and thin sheet
7.37 × 8 in (187 × 203 mm)3.7 mm1,557 mm1Any material, including 3 mm wood and acrylic
11.05 × 12 in (281 × 305 mm)5.5 mm2,335 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gingerbread man SVG files

← Waving gingerbread man All 19 gingerbread men Gingerbread girl with a skirt and bow →