Free gingerbread man SVG

Gingerbread man outline SVG

Gingerbread man outline, drawn as a line
Gingerbread man outline. The preview is the SVG file itself.

The biscuit as an even line with solid eyes, smile and buttons inside it. The face and buttons are separate pieces: draw or engrave it, or use it as a colouring page.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces7 separate pieces
Outlines to cut8: 7 outer edges and 1 cut-out
Cut length870 mm at this size
Narrowest part2.2 mm at this size
Nodes129 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,681 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.56 mm221 mm110Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)1.1 mm442 mm30Vinyl, card and thin sheet
2.5 × 3 in (64 × 76 mm)1.7 mm663 mm12Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)2.2 mm884 mm6Vinyl, card and thin sheet
5 × 6 in (127 × 152 mm)3.4 mm1,326 mm2Any material, including 3 mm wood and acrylic
6.67 × 8 in (169 × 203 mm)4.5 mm1,768 mm1Any material, including 3 mm wood and acrylic
10.01 × 12 in (254 × 305 mm)6.7 mm2,652 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gingerbread man SVG files

← Plain gingerbread man cookie shape All 19 gingerbread men Waving gingerbread man →