Gigi stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “GIGI” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.38 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 902 mm at this size |
| Narrowest part | 3.7 mm at this size |
| Nodes | 97 curve and line segments |
Measured from the file. PNG: 2,000 × 1,238 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.94 mm | 229 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.21 in (51 × 31 mm) | 1.9 mm | 458 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.81 in (76 × 46 mm) | 2.8 mm | 687 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.42 in (102 × 61 mm) | 3.8 mm | 916 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.62 in (152 × 92 mm) | 5.6 mm | 1,375 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.83 in (203 × 123 mm) | 7.5 mm | 1,833 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.25 in (305 × 184 mm) | 11 mm | 2,749 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Gigi SVG files
-
Gigi with a drop shadow Layered · 6 pieces
-
Gigi with a heart Solid · 5 pieces
-
Gigi in Pacifico Solid · 3 pieces
-
Gigi in Lobster Solid · 4 pieces
-
Gigi in Kaushan Script Solid · 6 pieces
-
Gigi in Lilita One Solid · 6 pieces
-
Gigi in Alfa Slab One Solid · 6 pieces
-
Gigi in Amatic SC Solid · 4 pieces
← Gigi outline lettering All 13 Gigi designs Gigi with a drop shadow →