Gigi with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Gigi” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 72 mm (3.94 × 2.84 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 12: 6 outer edges and 6 cut-outs |
| Cut length | 1,459 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 279 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,465 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.72 in (25 × 18 mm) | Over 1.5 mm | 371 mm | 130 | Vinyl, card and thin sheet |
| 2 × 1.44 in (51 × 37 mm) | Over 3 mm | 741 mm | 35 | Any material, including 3 mm wood and acrylic |
| 3 × 2.17 in (76 × 55 mm) | Over 4.6 mm | 1,112 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.89 in (102 × 73 mm) | Over 6.1 mm | 1,482 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.33 in (152 × 110 mm) | Over 9.1 mm | 2,224 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.78 in (203 × 147 mm) | Over 12 mm | 2,965 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.66 in (305 × 220 mm) | Over 18 mm | 4,447 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Gigi SVG files
-
Gigi with a heart Solid · 5 pieces
-
Gigi in Pacifico Solid · 3 pieces
-
Gigi in Lobster Solid · 4 pieces
-
Gigi in Kaushan Script Solid · 6 pieces
-
Gigi in Lilita One Solid · 6 pieces
-
Gigi in Alfa Slab One Solid · 6 pieces
-
Gigi in Amatic SC Solid · 4 pieces
-
Gigi in block capitals Solid · 4 pieces
← Gigi stencil plate All 13 Gigi designs Gigi with a heart →