Free Gigi SVG

Gigi in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gigi in Amatic SC, as a solid black shape
Gigi in Amatic SC. The preview is the SVG file itself.

“Gigi” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 69 mm (3.94 × 2.7 in), scales to any size
Pieces4 separate pieces
Outlines to cut4 outlines
Cut length800 mm at this size
Narrowest part4.2 mm at this size
Nodes218 curve and line segments

Measured from the file. PNG: 2,000 × 1,398 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 17 mm)1.1 mm203 mm130Vinyl, card and thin sheet
2 × 1.37 in (51 × 35 mm)2.1 mm406 mm35Vinyl, card and thin sheet
3 × 2.06 in (76 × 52 mm)3.2 mm610 mm15Any material, including 3 mm wood and acrylic
4 × 2.75 in (102 × 70 mm)4.3 mm813 mm8Any material, including 3 mm wood and acrylic
6 × 4.12 in (152 × 105 mm)6.4 mm1,219 mm2Any material, including 3 mm wood and acrylic
8 × 5.5 in (203 × 140 mm)8.5 mm1,626 mm2Any material, including 3 mm wood and acrylic
12 × 8.24 in (305 × 209 mm)13 mm2,438 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Gigi SVG files

← Gigi in Alfa Slab One All 13 Gigi designs Gigi in block capitals →