Free galaxy SVG

Spiral galaxy with two arms SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Spiral galaxy with two arms, as a solid black shape
Spiral galaxy with two arms. The preview is the SVG file itself.

A galaxy seen face on: a round core and two arms that wind outwards for a little over one turn, narrowing to their tips. Small stars are cut into the arms and knots of stars swell their edges.

What is in the file

Size71 × 100 mm (2.8 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length801 mm at this size
Narrowest part1.5 mm at this size
Nodes415 curve and line segments
Symmetry2-fold rotation

Measured from the file. PNG: 1,442 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.38 mm203 mm130Too fine for most machines
1.42 × 2 in (36 × 51 mm)0.76 mm407 mm35Fine detail: vinyl and paper only, weed with care
2.13 × 3 in (54 × 76 mm)1.1 mm610 mm15Vinyl, card and thin sheet
2.84 × 4 in (72 × 102 mm)1.5 mm814 mm8Vinyl, card and thin sheet
4.26 × 6 in (108 × 152 mm)2.3 mm1,221 mm2Vinyl, card and thin sheet
5.68 × 8 in (144 × 203 mm)3 mm1,628 mm2Any material, including 3 mm wood and acrylic
8.52 × 12 in (216 × 305 mm)4.6 mm2,441 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More galaxy SVG files

← Layered galaxy in four colours All 14 galaxies Pinwheel galaxy with four arms →