Free galaxy SVG

Galaxy at an angle with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Galaxy at an angle with stars, as a solid black shape
Galaxy at an angle with stars. The preview is the SVG file itself.

The two-armed spiral tipped away from you, as galaxies are usually seen, with a round bulge at its heart and seven four-pointed stars around it. The stars are loose pieces to place as you like.

What is in the file

Size100 × 90 mm (3.94 × 3.53 in), scales to any size
Pieces8 separate pieces
Outlines to cut22: 8 outer edges and 14 cut-outs
Cut length736 mm at this size
Narrowest part2.7 mm at this size
Nodes354 curve and line segments

Measured from the file. PNG: 2,000 × 1,800 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.69 mm187 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.79 in (51 × 46 mm)1.4 mm374 mm30Vinyl, card and thin sheet
3 × 2.69 in (76 × 68 mm)2.1 mm561 mm12Vinyl, card and thin sheet
4 × 3.58 in (102 × 91 mm)2.7 mm748 mm6Vinyl, card and thin sheet
6 × 5.38 in (152 × 137 mm)4.1 mm1,122 mm2Any material, including 3 mm wood and acrylic
8 × 7.17 in (203 × 182 mm)5.5 mm1,496 mm1Any material, including 3 mm wood and acrylic
12 × 10.75 in (305 × 273 mm)8.2 mm2,243 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More galaxy SVG files

← Barred spiral galaxy All 14 galaxies Galaxy in a circle of night sky →