Free Funcle SVG

Funcle outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Funcle outline lettering, drawn as a line
Funcle outline lettering. The preview is the SVG file itself.

“Funcle” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 25 mm (3.94 × 0.98 in), scales to any size
Pieces7 separate pieces
Outlines to cut14: 7 outer edges and 7 cut-outs
Cut length874 mm at this size
Narrowest part1.7 mm at this size
Nodes221 curve and line segments

Measured from the file. PNG: 2,000 × 556 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.25 in (25 × 6 mm)0.43 mm222 mm270Too fine for most machines
2 × 0.5 in (51 × 13 mm)0.86 mm444 mm85Fine detail: vinyl and paper only, weed with care
3 × 0.75 in (76 × 19 mm)1.3 mm666 mm36Vinyl, card and thin sheet
4 × 1 in (102 × 25 mm)1.7 mm888 mm20Vinyl, card and thin sheet
6 × 1.49 in (152 × 38 mm)2.6 mm1,332 mm7Vinyl, card and thin sheet
8 × 1.99 in (203 × 51 mm)3.5 mm1,776 mm5Any material, including 3 mm wood and acrylic
12 × 2.99 in (305 × 76 mm)5.2 mm2,664 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Funcle SVG files

← Funcle with stars All 13 Funcle designs Funcle stencil plate →