Free Funcle SVG

Funcle in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Funcle in Alfa Slab One, as a solid black shape
Funcle in Alfa Slab One. The preview is the SVG file itself.

“Funcle” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 23 mm (3.94 × 0.89 in), scales to any size
Pieces6 separate pieces
Outlines to cut7: 6 outer edges and 1 cut-out
Cut length520 mm at this size
Narrowest part3.1 mm at this size
Nodes110 curve and line segments

Measured from the file. PNG: 2,000 × 513 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.23 in (25 × 6 mm)0.79 mm132 mm280Fine detail: vinyl and paper only, weed with care
2 × 0.45 in (51 × 12 mm)1.6 mm264 mm90Vinyl, card and thin sheet
3 × 0.68 in (76 × 17 mm)2.4 mm396 mm39Vinyl, card and thin sheet
4 × 0.91 in (102 × 23 mm)3.1 mm528 mm22Any material, including 3 mm wood and acrylic
6 × 1.36 in (152 × 35 mm)4.7 mm792 mm7Any material, including 3 mm wood and acrylic
8 × 1.82 in (203 × 46 mm)6.3 mm1,057 mm6Any material, including 3 mm wood and acrylic
12 × 2.72 in (305 × 69 mm)9.4 mm1,585 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Funcle SVG files

← Funcle in Lilita One All 13 Funcle designs Funcle in Amatic SC →