Free Fourth of July SVG

Fourth of July in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fourth of July in Alfa Slab One, as a solid black shape
Fourth of July in Alfa Slab One. The preview is the SVG file itself.

“Fourth of July” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 61 mm (3.94 × 2.39 in), scales to any size
Pieces12 separate pieces
Outlines to cut14: 12 outer edges and 2 cut-outs
Cut length976 mm at this size
Narrowest part3 mm at this size
Nodes216 curve and line segments

Measured from the file. PNG: 2,000 × 1,244 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.76 mm248 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.21 in (51 × 31 mm)1.5 mm496 mm40Vinyl, card and thin sheet
3 × 1.82 in (76 × 46 mm)2.3 mm744 mm18Vinyl, card and thin sheet
4 × 2.43 in (102 × 62 mm)3 mm992 mm8Any material, including 3 mm wood and acrylic
6 × 3.64 in (152 × 93 mm)4.6 mm1,487 mm3Any material, including 3 mm wood and acrylic
8 × 4.86 in (203 × 123 mm)6.1 mm1,983 mm2Any material, including 3 mm wood and acrylic
12 × 7.28 in (305 × 185 mm)9.1 mm2,975 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fourth of July SVG files

← Fourth of July in Lilita One All 13 Fourth of July designs Fourth of July in Amatic SC →