Free Fourth of July SVG

Fourth of July outline lettering SVG

Fourth of July outline lettering, drawn as a line
Fourth of July outline lettering. The preview is the SVG file itself.

“Fourth of July” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 65 mm (3.94 × 2.56 in), scales to any size
Pieces14 separate pieces
Outlines to cut28: 14 outer edges and 14 cut-outs
Cut length1,594 mm at this size
Narrowest part1.4 mm at this size
Nodes375 curve and line segments

Measured from the file. PNG: 2,000 × 1,329 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 17 mm)0.36 mm405 mm140Too fine for most machines
2 × 1.3 in (51 × 33 mm)0.71 mm810 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.95 in (76 × 50 mm)1.1 mm1,215 mm15Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)1.4 mm1,620 mm8Vinyl, card and thin sheet
6 × 3.91 in (152 × 99 mm)2.1 mm2,429 mm2Vinyl, card and thin sheet
8 × 5.21 in (203 × 132 mm)2.8 mm3,239 mm2Vinyl, card and thin sheet
12 × 7.81 in (305 × 198 mm)4.3 mm4,859 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fourth of July SVG files

← Fourth of July with stars All 12 Fourth of July designs Fourth of July stencil plate →