Free Fourth of July SVG

Fourth of July in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fourth of July in Amatic SC, as a solid black shape
Fourth of July in Amatic SC. The preview is the SVG file itself.

“Fourth of July” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size92 × 100 mm (3.63 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut15: 12 outer edges and 3 cut-outs
Cut length1,526 mm at this size
Narrowest part1.5 mm at this size
Nodes444 curve and line segments

Measured from the file. PNG: 1,852 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.38 mm388 mm100Too fine for most machines
1.85 × 2 in (47 × 51 mm)0.76 mm775 mm25Fine detail: vinyl and paper only, weed with care
2.77 × 3 in (70 × 76 mm)1.1 mm1,163 mm12Vinyl, card and thin sheet
3.69 × 4 in (94 × 102 mm)1.5 mm1,550 mm6Vinyl, card and thin sheet
5.54 × 6 in (141 × 152 mm)2.3 mm2,326 mm2Vinyl, card and thin sheet
7.38 × 8 in (188 × 203 mm)3 mm3,101 mm1Any material, including 3 mm wood and acrylic
11.08 × 12 in (281 × 305 mm)4.6 mm4,651 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fourth of July SVG files

← Fourth of July in Alfa Slab One All 13 Fourth of July designs Fourth of July in block capitals →