Free football SVG

Split football for a name SVG

Split football for a name, as a solid black shape — Split football for a name. The preview is the SVG file itself.

The ball cut in two with a clear band between the halves, where a name goes. It comes as two pieces: the top with the laces and the bottom.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.71 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	3: 2 outer edges and 1 cut-out
Cut length	790 mm at this size
Narrowest part	3.9 mm at this size
Nodes	109 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,400 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 17 mm)	0.99 mm	201 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.38 in (51 × 35 mm)	2 mm	401 mm	35	Vinyl, card and thin sheet
3 × 2.06 in (76 × 52 mm)	3 mm	602 mm	15	Vinyl, card and thin sheet
4 × 2.75 in (102 × 70 mm)	4 mm	803 mm	8	Any material, including 3 mm wood and acrylic
6 × 4.13 in (152 × 105 mm)	5.9 mm	1,204 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.5 in (203 × 140 mm)	7.9 mm	1,605 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.26 in (305 × 210 mm)	12 mm	2,408 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More football SVG files

← Half football All 21 footballs Football monogram frame →