Free flower SVG

Rosette flower in three tiers SVG

Rosette flower in three tiers, as a solid black shape
Rosette flower in three tiers. The preview is the SVG file itself.

Three rings of six round petals, each ring smaller than the one behind and turned half a step. Channels between the rings stop short at the valleys, so it stays in one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size95 × 100 mm (3.74 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,052 mm at this size
Narrowest part2.3 mm at this size
Nodes130 curve and line segments
Symmetry6-fold rotation and mirror

Measured from the file. PNG: 1,906 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.58 mm267 mm100Fine detail: vinyl and paper only, weed with care
1.9 × 2 in (48 × 51 mm)1.2 mm534 mm25Vinyl, card and thin sheet
2.85 × 3 in (72 × 76 mm)1.8 mm802 mm9Vinyl, card and thin sheet
3.8 × 4 in (97 × 102 mm)2.3 mm1,069 mm6Vinyl, card and thin sheet
5.71 × 6 in (145 × 152 mm)3.5 mm1,603 mm2Any material, including 3 mm wood and acrylic
7.61 × 8 in (193 × 203 mm)4.7 mm2,138 mm1Any material, including 3 mm wood and acrylic
11.41 × 12 in (290 × 305 mm)7 mm3,206 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flower SVG files

← Double flower with sixteen petals All 26 flowers Plumeria flower with overlapping petals →