Free floating ornament SVG

Wreath floating ornament with a bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wreath floating ornament with a bow, in layered colours
Wreath floating ornament with a bow. The preview is the SVG file itself.

A ring of thirty-two small leaves with a bow at the bottom and an empty middle. The middle takes a year, a monogram or a short name.

What is in the file

Size92 × 100 mm (3.62 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut10: 2 outer edges and 8 cut-outs
Cut length1,356 mm at this size
Narrowest part1.9 mm at this size
Nodes264 curve and line segments
Layers2: decal and insert

Measured from the file. PNG: 1,844 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.48 mm344 mm100Too fine for most machines
1.84 × 2 in (47 × 51 mm)0.97 mm689 mm25Fine detail: vinyl and paper only, weed with care
2.76 × 3 in (70 × 76 mm)1.4 mm1,033 mm12Vinyl, card and thin sheet
3.68 × 4 in (93 × 102 mm)1.9 mm1,378 mm6Vinyl, card and thin sheet
5.51 × 6 in (140 × 152 mm)2.9 mm2,067 mm2Vinyl, card and thin sheet
7.35 × 8 in (187 × 203 mm)3.9 mm2,755 mm1Any material, including 3 mm wood and acrylic
11.03 × 12 in (280 × 305 mm)5.8 mm4,133 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More floating ornament SVG files

← Holly floating ornament All 14 floating ornaments Cardinal floating ornament →